ãÌãæÚÉ ÌæÇÆÒ ÌÇãÚÉ ÝíáÇÏáÝíÇ      PU SMS      9th International Middle Eastern Simulation Multiconference "MESM2008"      Philadelphia University's English Department is Hiring      Culture of Love & Hate (The 13th Philadelphia International Conference)      ãÔÑæÚ ÊÍÝíÒ ÕäÇÚÉ ÇáãÍÊæì ÇáÑÞãí ÇáÚÑÈí     

MENU

Research at the Faculty of Engineering

  1. Dr. Kasim M. Al-Aubidy, "Design and implementation of a PC-based events recorder", Engineering and Technology Magazine, Vol.12, No.11, Nov. 1993.

  2. Dr. Kasim M. Al-Aubidy, "Design and evaluation of a fuzzy logic rule-based controller".   11th Inter. Conf. On Applied Informatics, Paper No.(204-066), France 1993.

  3. Kasim M. Al-Aubidy, "Computer control and flexible manufacturing systems" . Union of Arab Scientific Research Councils Syp. on Robotics, 4-6 May, Baghdad 1993.

  4. Dr. Kasim M. Al-Aubidy, "Application of fuzzy logic algorithm for control of industrial plants". 11th Iraqi Engineering Conf. , 22-25 Nov. , Baghdad 1994.

  5. Dr. Kasim M. Al-Aubidy, "Design and implementation of a PC-based tesseral addressing system". 11th Iraqi Engineering Conf. , 22-25 Nov. , Baghdad 1994.

  6. Dr. Kasim M. Al-Aubidy, "Real-time  control of DC drives using fuzzy algorithms". Engineering and Technology Magazine, Vol. 13, No.9, Sept. 1994.

  7. Dr. Kasim M. Al-Aubidy, "Real-time Microcomputer Control of Sensorless AC Machines". 1st Iraqi Technological Conf. , Baghdad 1995.

  8. Dr. Kasim M. Al-Aubidy, "Load angle measurement of sensorless AC machines". CATAEE'95 Conf. Philadelphia University, Jordan 1995.

  9. Dr. Kasim M. Al-Aubidy, "Self-organizing fuzzy logic controller; design & implementation". CATAEE'95 Conf. Philadelphia University, Jordan 1995.

  10. Dr. Kasim M. Al-Aubidy, "Use of fuzzy  logic for implementing rule-based control of a flexible link manipulator". Robotics and automation symposium, Baghdad 1995.

  11. Dr. Kasim M. Al-Aubidy, "Trajectory planning and tracking of  a robot manipulator". Robotics and automation symposium, Baghdad 1995.

  12. Dr. Kasim M. Al-Aubidy, "Fuzzy logic control of a distillation column". 2nd Iraqi Technological Conf., May 1996.

  13. Dr. Kasim M. Al-Aubidy, "Real-time tuning of PID controllers using fuzzy logic algorithms". Accepted to be published in Engineering and Technology Magazine.

  14. Dr. Kasim M. Al-Aubidy, "Expert workstation as an instructional tool using fuzzy logic". 2nd Iraqi Technological Conf., May 1996.

  15. Dr. Kasim M. Al-Aubidy, "Design and performance of on-line fuzzy tuning algorithm for conventional PID controllers", JTEA'96 Conference, Tunis, Paper No. 70, Nov. 96.

  16. Dr. Kasim M. Al-Aubidy, "Decision-making in expert education system using fuzzy logic". Computer research magazine, No.1, 1996.

  17. Dr. Kasim M. Al-Aubidy, "Advisory expert system for post graduate students". Computer  research  magazine, No.2, 1996.

  18. Dr. Kasim M. Al-Aubidy, "Distillation column control using fuzzy logic". The 1st Algerian congress of process control, Algiers, Oct. 1996.

  19. Dr. Kasim M. Al-Aubidy, "Computer control of a distillation column using fuzzy logic decouplers". The 9th  Intr. Conf. on Computer Theory and Applications, Egypt, Sept. 1996.

  20. Dr. Kasim M. Al-Aubidy, "Fuzzy advisory system for student registration in  the technical institutes". College of Engineering Conference, Al-Mystansirya University, Baghdad, April 1997.

  21. Dr. Kasim M. Al-Aubidy, "Decision-making  in  intelligent  distributed computer  systems". The 1st Baghdad Conf. For Electr. Eng., Baghdad 1997.

  22. Dr. Kasim M. Al-Aubidy, "Student modeling in expert education systems using fuzzy logic". The 2nd Conf. of Computer Technology & Applications, Union of Arab Scientific Research Councils, Baghdad 1997.

  23. Dr. Kasim M. Al-Aubidy, "Fuzzy logic & computer aided instruction systems". Optimum Applications of Computer Technology Symp. Tripoli, 1998.

  24. Dr. Kasim M. Al-Aubidy, "A fuzzy expert tool for educational system design". Software Eng. Education Symposium (SEES'98), 18-20 November 1998, Poland.

  25. Dr. Kasim M. Al-Aubidy, "An expert advisor for course selection in universities and higher institutes". Engineering Conf.'98, Libya 1998.

  26. Dr. Kasim M. Al-Aubidy, "Fuzzy logic and industrial computer control systems". Eng. Conf.'98, Libya 1998.

  27. Dr. Kasim M. Al-Aubidy, "A Virtual reality based educational module for knowledge learning & skills training", 1st Arab Conference for Software Industry & development, Amman 11-13 July 1999.

  28. Dr. Kasim M. Al-Aubidy, "Design of a programmable bus for microprocessor-based systems", 3rd International Conference IEE-CATAEE99, Page (165-169), Amman 19-20 October 1999.

  29. Dr. Kasim M. Al-Aubidy, "Neural network-based fuzzy identifier: design & evaluation", IEEE-ACIDCA'2000 Conf., Page (108-113), Vol. (IM), Tunisia 22-24 March 2000.

  30. Dr. Kasim M. Al-Aubidy, "A hierarchical manufacturing route planner based on heuristic algorithm", IEEE-ACIDCA'2000 Conf., Page (214-220), Vol. (EIA), 22-24 March 2000.

  31. Dr. Kasim M. Al-Aubidy, "Modeling an Interactive FMS scheduler Using Colored Petri Nets", IEEE/SCS 2nd Middle East  Conf. On Simulation & Modeling, Page (54-61), 28-30/8/2000.

  32. Dr. Kasim M. Al-Aubidy, "A Real-Time Hierarchical Controller for Robots in Flexible Manufacturing Systems", German Conf on Smart Systems & Devices SSD-2001, Tunisia March 2001. 

  33. Dr. Kasim M. Al-Aubidy, "Fuzzy logic & computer aided instruction systems". Optimum Applications of Computer Technology Symp. Tripoli, 1998.

  34. Dr. Kasim M. Al-Aubidy, "A fuzzy expert tool for educational system design". Software Eng. Education Symposium (SEES'98), 18-20 November 1998, Poland.

  35. Dr. Kasim M. Al-Aubidy, "An expert advisor for course selection in universities and higher institutes". Engineering Conf.'98, Libya 1998.

  36. Dr. Kasim M. Al-Aubidy, "Fuzzy logic and industrial computer control systems". Eng. Conf.'98, Libya 1998.

  37. Dr. Kasim M. Al-Aubidy, "A Virtual reality based educational module for knowledge learning & skills training", 1st Arab Conference for Software Industry & development, Amman 11-13 July 1999.

  38. Dr. Kasim M. Al-Aubidy, "Design of a programmable bus for microprocessor-based systems", 3rd International Conference IEE-CATAEE99, Page (165-169), Amman 19-20 October 1999.

  39. Dr. Kasim M. Al-Aubidy, "Neural network-based fuzzy identifier: design & evaluation", IEEE-ACIDCA'2000 Conf., Page (108-113), Vol. (IM), Tunisia 22-24 March 2000.

  40. Dr. Kasim M. Al-Aubidy, "A hierarchical manufacturing route planner based on heuristic algorithm", IEEE-ACIDCA'2000 Conf., Page (214-220), Vol. (EIA), 22-24 March 2000.

  41. Dr. Kasim M. Al-Aubidy, "Modeling an Interactive FMS scheduler Using Colored Petri Nets", IEEE/SCS 2nd Middle East  Conf. On Simulation & Modeling, Page (54-61), 28-30/8/2000.

  42. Dr. Kasim M. Al-Aubidy, "A Real-Time Hierarchical Controller for Robots in Flexible Manufacturing Systems", German Conf on Smart Systems & Devices SSD-2001, Tunisia March 2001.

  43. Dr. I. Badran, "PH.D Thesis Detection and Measurements of Internal Discharges in High Voltage Bushings Under Direct – Voltage Conditions".  University of London, Queen Mary College, London 1970

  44. Dr. I. Badran, "Internal Discharges in Paper Insulation Under Direct- Voltage Conditions. International Symposium", High-Voltage Technology, Munich, Germany, March   1972.

  45. Dr. I. Badran, "Oscillographic Records of Internal Discharges in Solid Insulation under Direct-Voltage Conditions". Bulletin of the Faculty of Engineering Vol. 2,University of Libya, Libya 1973.

  46. Dr. I. Badran ,"On the Fundamentals of Environment Problems in Tropical Areas". Cyprus Civil Engineering and Architects Associations, Nekoosa,  Feb. 1976. 

  47. Dr. I. Badran, "Some Aspects of Planning of Rural Electrification", Rural   Electrification Conference, Baghdad 1975. 

  48. Dr. I.Badran , "Natural Day Light and Solar Maps". National Center for Architecture and Engineering Constancy,Baghdad  1976

  49. Book: Dr. I.Badran, Problems of Science & Technology in the Arab World, Amman, 1978 and 1985

  50. Book: Dr. I.Badran, Science, Technology & Development in the Arab world, Baghdad, 1984

  51. Book: Dr. I.Badran, Encyclopedia of Scientists & Inventors, Beirut, 1987

  52. Book: Dr. I.Badran, Handbook of Illumination Engineering, Baghdad, 1976

  53. Book: Dr. I.Badran, General Recommendations for Illumination, Amman, 1978

  54. Book: Dr. I.Badran, Problems of Development in the Arab World, Amman, 1988

  55. Book: Dr. I.Badran, Energy in Jordan, Amman, 1988

  56. Book: Dr. I.Badran, Nuclear Energy & The Chernobyl Incident, Amman, 1988

  57. Book: Dr. I.Badran, Natural Resources, Energy & Water in Jordan, Amman, 1994

  58. Book: Dr. I.Badran, Studies on the Arab Mind, Beirut, 1974

  59. Book: Dr. I.Badran, History & Progress in the Arab world, Beirut, 1991

  60. Book: Dr. I.Badran, On Culture, Thought & Progress, Amman, 1993

  61. Book: Dr. I.Badran, Jordan and Moderationism, Amman 1988

  62. Book: Dr. I.Badran, The Case No. 1387 (Theatrical Play), Damascus, 1974

  63. Book: Dr. I.Badran, The Mirage (Theatrical Play), Baghdad, 1976

  64. Book: Dr. I.Badran, Climate Data for Jordan, Jordan Electricity Authority, Amman 1987

  65. Book: Dr. I.Badran, Safety Regulations for the Operation of High Medium & Low Voltage Networks, Jordan Electricity Authority, Amman 1987

  66. Book: Dr. I.Badran, General Standards & Regulations for Non-Industrial Electrical Installations, Jordan Electricity Authority, Amman, 1987.

  67. Book: Dr. I.Badran, Agriculture Agenda, university of jordan, 1990.

  68. Book: Dr. I.Badran, Directory of Jordanian Exports, Ministry of Industry & Trade, Amman, 1991.

  69. Book: Dr. I.Badran, A Guide Book to the Investor, Ministry of Industry & Trade, Amman, 1991.

  70. Dr. Monaf Al-Din, "The Use of Canned Rotors in High Speed Permanent Magnet Machines"; Fifth International Conference on Electrical Machines and Drives; 1991.

  71. Dr. Monaf Al-Din, "Use of Canned Rotors in High-Field Permanent Magnet Machines"; IEE Proce., Pt. B., Vol. 139, No. 5, 1992.

  72. Dr. Monaf Al-Din, " Knowledge Based Automatic Mesh Generation for Finite Elements Method"; The Science and Technology Magazine, The University of Technology, Baghdad-Iraq, 1996.

  73. Dr. Monaf Al-Din, " A New Method to Compute Eddy Current Losses by the Finite Elements Method"; IEEE Industrial Applications Annual Meeting, Paper Ref. 97301, New Orleans, 1997.

  74. Dr. Monaf Al-Din , "The Use of Low Loss Low Permeability Materials in the Design of High Speed Permanent Magnet Motors"; 2nd Conf. On Computation Aspect and Their Applications in Electrical Engineering (CATAEE-97), Philadelphia University, Amman-Jordan.

  75. Dr. Monaf Al-Din, "Computer Aided Analysis of High Speed Permanent Magnet Synchronous Motors"; 2nd Conf. On Computation Aspect and Their Applications in Electrical Engineering (CATAEE-97), Philadelphia University, Amman-Jordan.

  76. Dr. Monaf Al-Din, " Numerical Evaluation of Electromagnetic Torque in Permanent Magnet Synchronous Motors", MEMS'2000 2nd Middle Eastern Symposium on SIM, Philadelphia University, Amman-Jordan.

  77. Dr. Monaf Al-Din, " Speed Control of Induction Motor Using PWM Technique and Series Reactor", MEMS'2000 2nd Middle Eastern Symposium on SIM, Philadelphia University, Amman-Jordan. 2000.

  78. Dr. Monaf Al-Din, "A Novel Fuzzy Like PI Controller", First International Industrial Engineering Conference, The University of Jordan, Amman-Jordan, 2001.

  79. Nabil Kablan, "An Image Processing System Organization". Leningrad Electrical Engineering Institute. Journal, N324, St.Petersburg.Russia, 1983.

  80. Nabil Kablan,  "An Image Input Device and Image Primarily Processing". In book "Theory  and  Practice  of Information System Construction", Journal of Sarative University, Sarative, Russia, 1982.

  81. Nabil Kablan, "An image Processing Program" , Pack  - System-79 In new programs  Library,  Moscow, Number (2) 07311-81,1982.

  82. Dr. J. Al- Atrash, "Design of Low Voltage Distribution Networks using the Switched Winding Transformers " , Proceedings of Jordan International Power System Conference , Octobers 4-6/1993, PP 130-135 .

  83. Dr. J. Al- Atrash, "Combining The Historical Data and load Flow Results to Calculate Energy losses in Distribution System " , Proceedings of computational aspects and their application electrical engineering . May 21-23/1995 ( CATAEE-95) ,PP1-16.

  84. Dr. J. Al- Atrash, New Approaches for a Better Evaluation of the Energy Losses in a Distribution System" , Al-Rafidan Engineering Journal, vol 7,No:1,1999, PP1-22.

  85. Dr. J. Al- Atrash, "Design of 500KVA Thyristor Switched Transformers to Reduce Energy Losses" , Engineering and technology journal vol: 28, Number 2,2001, PP72-78.

  86. Dr. J. Al- Atrash, "Use Of the Switchable  Transformers in Distribution Power System",  vol 20, Number 5,2001, PP315-336.

  87. Manhal Sirat, "Application of artificial Neural Networks to fracture Analysis" , at the Aspo HRL, SE-Sweden :Facture Sets Classification (In Press: Int. J. Rock Mech. Min. Sci.),2001.

  88. Manhal Sirat, "Stress Control of Hydraulic Conductivity in Fracture-Saturated Swedish Bedrock " , (In Press: Engineering Geology, Special edition on geosciences and nuclear waste disposal), 2001.

  89. Manhal Sirat, "Block Tilting" at the Aspo HRL , SE- Sweden; Structural And Neural Network analyses .

  90. Manhal Sirat, "Applying artificial neural Networks to predict Quaternary pale climate in Arctic Ocean".

  91. Manhal Sirat, "Neural Networks Analyses of  Agri-chemical  Vulnerability Assessment of Water from Rural Private Wells", within United States Of America.

  92. Dr. Hussein Abdul Kadir, "Opimal performance of HMOS VLSI Circuits " ,Microelectronics No.6 Vol.13 Nov./Dec. 1982 .

  93. Dr. Hussein Abdul Kadir,  "Scaling down effect on the performances of VLSI HMOS circuits " Iraqi Conference on Engineering 16-19 Dec. 1985  Baghdad-IRAQ 

  94. Dr. Hussein Abdul Kadir, "Thermal analysis of VLSI HMOS circuits " Forth scientific conference ,Scientific Research Council ,23-28 Oct. 1986 .Baghdad-Iraq.

  95. Dr. Hussein Abdul Kadir, "Computer Aided Layout design for integrated circuit fabrication " ,Symposium on industrial applications of micro and personal computers ,Scientific Research Council 16-18 Dec. 1986 ,Baghdad -Iraq 

  96. Dr. Hussein Abdul Kadir, "Logic level and performance variation of VLSI circuits as a function of βr ",Modeling, Simulation and Control ,A. AMSE Press Vol.12  No.3,1987 .

  97. Dr. Hussein Abdul Kadir, "Effect of deposition conditions on the optical properties of CdS Thin Film " International AMSE conference on modeling and simulation  ,Karlsruhe (west Germany ), Vol.2A  20-22 July 1987 .  

  98. Dr. Hussein Abdul Kadir, "Electrical properties variation of CdS thin film with deposition conditions and film thickness " ,First regional Symposium on Material Science in the Arab Status , 29-31  Dec. 1987 , Alexandria University , EGYPT

  99. Dr. Hussein Abdul Kadir, "Substrate bias generator ,its importance and characteristics in VLSI circuits ", Modeling , Simulation and Control ,A, Vol. 15 ,No.4 , 1988

  100. Dr. Hussein Abdul Kadir, "Uniformity and Thermal characterization of Al-CdS-Al structures at different temperatures " ,Fifth Scientific Conference ,Scientific Research Council , 7-11 oct.1989 Baghdad –Iraq.

  101. Dr. Hussein Abdul Kadir, "Information storage capability of thin film devices ", Journal of Engineering and Technology  , Vol.5 annex No.10 , 1991 ,University of Technology –Iraq.

  102. Dr. Hussein Abdul Kadir, "Thin film RCG notch filter modeling " ,Mediterranean Electro-technical Conference Melecon ,91 IEEE ,22-24 May 1991 Yugoslavial.

  103. Dr. Hussein Abdul Kadir, "CdS/pSi thin film devices ,their characteristics and applications " ,First Basrah      electrical Engineering Symposium ,20-21 April 1992 ,Basrah –Iraq .

  104. Dr. Hussein Abdul Kadir, "Thin film CdS diodes and their space charge injection behavior " , Journal of Engineering and Technology Vol.11 No.4 ,1992 ,University of Technology  ,Iraq.

  105. Dr. Hussein Abdul Kadir, "Conduction mechanism in double insulated layer fabricated on epitaxial GaAs " 11th Iraqi Engineering Conference ,Nov. 1993 , Baghdad –Iraq.

  106. Dr. Hussein Abdul Kadir, "Electrical and optical characteristics of MIOS and MIMOS structures " ,Mu`tah  Journal Vol.9 ,No.3 ,1994 ,p. 271-284 ,Mu`tah University –Jordan.

  107. Dr. Hussein Abdul Kadir, "Charge trapping in MIOS memory structures under positive and negative biasing ", International Journal of Electronics ,Feb.1994 ,Vol.76 ,No.2 , p. 246-255.

  108. Dr. Hussein Abdul Kadir,"Photoelectrical characterization of n-CdTe/pSi structure " ,Fourth Arab  International Solar Energy Conference ,Nov. 1993 ,Amman Jordan .  

  109. Dr. Hussein Abdul Kadir, "Effect of substrate temperature and aging time on the optoelectronic properties of nCdS/pSi heterojunction ", Fourth Arab International Solar Energy Conference,   Nov. 1993 ,Amman –Jordan.

  110. Dr. Hussein Abdul Kadir,"Effect of substrate temperature and annealing on the electronic properties of CdTe  thin film " ,First Mosul Conference on Electrical Engineering  ,24-26 April 1995 , University of Mosul , Mosul –Iraq.

  111. Dr. Hussein Abdul Kadir, "Effect of annealing time and deposition rate on the forming characteristics of thin SiO  film " ,First Mosul Conference on Electrical Engineering  ,24-26 April 1995 ,University of Mosul , Mosul –Iraq .

  112. Dr. Hussein Abdul Kadir, "Characterization of In-doped CdTe thin film " ,Mu`tah Journal Vol.11 No.5 ,1996 ,  p.207-218 , Mu`tah University –Jordan.

  113. Dr. Hussein Abdul Kadir, "CdS thin film transistor with double gate insulators " , International Annual  Conference of the University of Batna , June 1997 , Algeria .

  114. Dr. Hussein Abdul Kadir, "Simplified Model for thin film transistor`s I-V characteristics " International Electrical and Electronic Engineering Conference  JIEEEC 98 ,April 1998 ,Amman –Jordan.

  115. Dr. Hussein Abdul Kadir,"Storage capability of MIOS devices using computerized measurement system " ,the Second Scientific Conference on Computer and their applications ,21-22 Sept. 1998 , Amman-Jordan .

  116. Dr. Hussein Abdul Kadir, "A wide band CdS/Si Photodetector  " 3rd Electrical Engineering Conference ,April 1999 , Mu`tah University , Jordan. 

  117. Dr. Hussein Abdul Kadir, "Programming characteristics of Al/SiO/SiO2/Si Memory devices ", 3rd Electrical Engineering Conference , April 1999 , Mu`tah University  , Jordan.

  118. Dr. Hussein Abdul Kadir, "Characterization of nonvolatile MIOS memory devices using computerized measurement system " 3rd Electrical Engineering Conference  , April 1999 , Mu`tah University , Jordan .

  119. Dr. Hussein Abdul Kadir, "Optimum design of 1Mbit SRAM circuit using submicron CMOS technology ", the 2nd Middle East Symposium on Simulation & Modeling  MESM 2000 , August 28-30, 2000 ,Philadelphia University , Amman –Jordan .

  120. Dr. Hussein Abdul Kadir, "Opto-thermal characterization of CdS/CdTe Structures" , Sharjah Solar Energy Conference , 19-22 Feb. 2001, University of Sharjah ,UAE .

  121. Al-Qawasmi , "Analysis of Noise Immunity of Telecommunication System with multi-Position Signals" , Problem of Avionics, k.:Kiuca ,1997,P.175-179.

  122. Al-Qawasmi , "Analytical Compare for Digital Telecommunication System with Multi-Position Signls" ,  Problem of Avionics, k.:Kiuca ,1997,P.190-195.

  123. Al-Qawasmi , " Algorithm of Free Accessibility in System of Information Exchange with Mobile Subscribers", All Russian Science Technical Organization "knew Technology Information " , Taganrog University , 1995. P.202-203.

  124. Al-Qawasmi , "Analysis of Effectiveness Of Mobile Wide-Band Telecommunication Systems" , International Science Technical Organization "Air Navigation and Avionics" ,K.: Kiuca , 1998. P.39-40.

  125. Al-Qawasmi , "Optimization of Wide-Band Telecommunication System",  International Science Technical Organization "Air Navigation and Avionics" ,K.: Kiuca , 1998. P.40.

  126. Al-Qawasmi , "Prespective Application of Wide-Band Signals In Civil Aviation of Mobile Telecommunication" , International Science Technical Organization "Air Navigation and Avionics" ,K.: Kiuca , 1996. P.49. Al-Qawasmi , "The Effect of Frequency-Time Distortion On The Effectiveness Wide-Band Telecommunication Systems" , Kiuca , 1999, P.139-142.

  127. Al-Qawasmi , "Analysis Of Latent Of Wide-Band Telecommunication Systems" , Knew Problems of Avionics, k.:Kiuca ,1999.

  128. Dr. Ahmad Saleh, "Complete Model Of the Solar Collector", Parametric Analysis of Solar Collectors , Milan Polytechnic university , 1997.

  129. Dr. Ahmad Saleh, "New Modeling Method Of The Absorption Chiller" , Modeling Of solar cooling System , Milan Polytechnic university , 1998.

  130. Dr. Lubna B. M. Fahad, "Direct Minimization technique for fuzzy switching functions". Al-Mystansirya University Journal, Baghdad, No. 1,1997.

  131. Dr. Lubna B. M. Fahad, "Minimization of fuzzy switching functions" The 2nd Conf. of Computer Technology & Applications, Union of Arab Scientific Research Councils, computer researches journal, No.5 Baghdad 1997.

  132. Dr. Lubna B. M. Fahad, "New representation of fuzzy exclusive-OR functions", AL-Rafidain College Journal, No. 6, 2000.

  133. Dr. Lubna B. M. Fahad, "Knowledge Acquisition based on fuzzy exclusive OR function" CATAEE2001 Conf. Philadelphia University, Jordan 2001.

  134. Dr. Lubna B. M. Fahad, "Fuzzy REED-MULLER expansion" CATAEE2001 Conf. Philadelphia University, Jordan 2001.
  135. Dr. Mujahid Fahmy "Imaging Of Concealed Objects By Ultrasound", IEEE MELCOM' 85, Madrid, Spain, Oct. 1985

  136. Dr. Mujahid Fahmy "An Ultrasonic Holographic Imaging System", JIEEEC' 85, Amman, Jordan, 28Apr.-1May, 1985

  137. Dr. Mujahid Fahmy "A Microprocessor-Based Ultrasonic Holographic Imaging System", 2nd International Baghdad Conference On Computer and Applications, 1986, Baghdad, Iraq.

  138. Dr. Mujahid Fahmy "Improved Long wavelength Holographic Imaging Utilizing Two Holograms", 1st Basrah Elect. Conference, 1992, Basrah Univ., Iraq.

  139. Dr. Mujahid Fahmy " On-Line Microcomputer-Based Multilevel Integrater", Technical Journal, Technical Institute Foundation, 1994, Baghdad, Iraq.

  140. Dr. Mujahid Fahmy Feasibility Of Holographic Imaging Using Three Holograms", Al-Rafidain Engg. Journal, Vol.1, No.1, 1993, Mosul Univ., Iraq.

  141. Dr. Mujahid Fahmy "Effect Of Phase Error On Holographic Imaging Quality Of a Plane And Thick Object",Scientific Journal,TikritUniv.,Vol.3,No.1,1996, Iraq.

  142. Dr. Mujahid Fahmy "Holographic Resolution Enhancement Using PronyMethod",IASTED International Conference on Signal and Image Processing,SIP'98,Las Vegas,USA,1998.

  143. Dr. Mujahid Fahmy "High Resolution Imaging Of Concealed Object By Ultrasound" IASTED International Conference On Signal and Image Processing, SIP'99,Nassau,Bahamas-USA,1999.

  144. Dr. Mujahid Fahmy "Direct Phase-Retrieval Approach For Long Wavelength Imaging Applications",VIPROM Com'99.Workshop.Zadar,Croatia.

  145. Dr. Mujahid Fahmy "Improved Resolution For Buried Object Imaging" IASTED International Conference On Computer Graphic And Imaging. CGIM'99,California,USA,1999.

  146. Dr. Mujahid Fahmy "Prony Model-Based Imaging of Buried Object with Different Concealing Media" IASTED International Conference On Modelling,Identification, and Control.(MIC2001) Innsbruck,Austria,2001.

  147. Dr. MOHAMMED MAHDI "Rule-Based Fuzzy Logic Controller Design Of Industrial Plants, M.Sc Thesis, and Control & Computer Eng. Dept. University Of Technology -Baghdad - Iraq.

  148. Dr. MOHAMMED MAHDI "Design & Evaluation Of Fuzzy Logic Rule-Based Controller, Eleventh Inter. Conf. On Applied Informatics Page No.(204-206) France-1993.

  149. Dr. MOHAMMED MAHDI "Applications Of Fuzzy Logic Algorithm For Control Of Industrial Plants, First Iraqi Eng. Conf., 22-25 Nov., Baghdad-1994.

  150. Dr. MOHAMMED MAHDI "Self-Organizing Fuzzy Logic Controller, Design & Implementation, CATAEE, 95 Conf., 21-23 May, Philadelphia University, Jordan-1995.

  151. Dr. MOHAMMED MAHDI "NeuroFuzzy Controller Design, PhD Thesis, Control & Computer Eng. Dept. University Of Technology, 1998.

  152. Dr. MOHAMMED MAHDI "NeuroFuzzy System Design For Control Applications:- Part1: Theory & Design.

  153. Dr. MOHAMMED MAHDI "Part2: Applications. CATAEE, 99 Conf., 19-20 October, Philadelphia University, Jordan-1999.

  154. S.M. Abd Rabbo , Y.A.Elmashad , and S.M.Megahed ,( Robot manipulator simulation using compuer graphics , 2nd international Ain Shams University conf .Cairo 1987 pp 205 - 216

  155. S.M. Abd Rabbo , Y.A.Elmashad , and M.Z.Zahran '' simulation and optimal control of redundant manipulators '' international operation research conf. Vol 11 1988 .Cairo pp 214-222

  156. S.M. Abd Rabbo , M.Baker .M.A. elsalam .M.Z.Zahran '' a new experimental computer controlled legged vehicle '' eighth international conf. Alexandria, Egypt , vol IV pp105-111

  157. H.A.Soliman , S.M.Abd rabbo , Elied A., and Q.Odat,'' A control system for fuel air mixture quality in spark ignition engines '' fifth international conf. On energy and environment , Cairo , Egypt . 1996 , volume I, pp451-462S. M. abd Rabbo, and A. A. Ibrahim, "Theoretical and experimental investigation into an axial vibration during turning" ," journal of engineering, faculty of engineering Menia University., January 2001.

  158. S. M. Abd rabbo, and Y. El-Mashad, "Fuzzy control of a pneumatic servomechanism ",journal of mattaria faculty of eng. , Helwan University June, 2002.

  159. S.M. Abd Rabbo, " Neural network model for recognition of a robot trajectory",(under publication )

  160. Dr. Tarek A Tutunji "Geologically-Enhanced Vertical Resolution of NMR Echo-Train Data" SPWLA 41st Annual Logging Symposium. Dallas, TX. June 2000

  161. Dr. Tarek A Tutunji "HASS and ATE Results in Production: Failure Analysis & Comparison of Vendors" IEEE /CPMT Workshop on Accelerated Stress Testing. Pasadena, CA Sep. 1998

  162. Dr. Tarek A Tutunji "Deterministic and Stochastic Logarithmic Barrier Function Methods for Neural Network Training", Parallel Computing in Optimization, (A. Migdalas, P.M. Pardalos and S. Storoy, Eds) Kluwer Academic Publishers, Chapter 13, pp. 519-574, 1997

  163. Dr. Tarek A Tutunji "Methods to design low sensitivity canonical digital filters using impulse response data" International Symposium on Circuits and Systems (ISCAS) 1996, Atlanta, GA, vol. II, pp. 397-400, May 1996.

  164. Dr. Tarek A Tutunji "A Stochastic Logarithmic Barrier Function Method for Neural Network Training with Bounded Weights", Intelligent Engineering Systems through Artificial Neural Networks (ANNIE), eds. C.H. Dagli,Akay, Chen, B.R. Fernandez and J. Ghosh, ASME Press, 5, 167-172, 1995. (Nominated for best paper award)

  165. Dr. Tarek A Tutunji "Pareto Optimal Designs of Low Sensitivity Digital Filters: Parallel and Cascade Structures" International Conference on Statistics and Probability (ICASP) 1994, Adelaide, Australia, vol. 3, pp. 557-560, April 19-22, 1994.

| Main | Overview | Faculty Members | Research | Graduates |